HC Home

Energy-efficient home ventilation.

A good indoor climate determines the health and well-being of the entire family and protects buildings and interior from moisture damage.

The HC range of home ventilation units has built-in RH sensors automatically adjusting air volumes in relation to the relative humidity in the home. This means that there is no need to wire the unit up to external sensors.

The HC units are constructed with a new, light-weight aluminium counter flow heat exchanger developed and manufactured by Dantherm, which has an efficiency level of up to 95%.

The integrated control panel allows the user to adjust individual default settings such as manual or automatic control of ventilation speed. With an optional wireless remote control the user gets access to further control options such as away and night operation.

  • Dantherm home ventilation HCV Model HCV
  • Dantherm domestic ventilation Model HCH
Passive House
certified home
ventilation units

The HC range of home ventilation units are certified for use in passive houses by the German Passive House Institute.

Home Ventilation
Dantherm Climatech
Say goodbye to PM2.5, get a clean inside air environment
  • Private houses
  • Flats
  • Villas
  • Apartments
Features and Benefits
  • The unit is built into a cabinet of 0,8 mm aluzink panels
  • Demand-controlled ventilation with integrated humidity sensor
  • High heat recovery - up to 95%
  • PHI, DIBt and SAP Apprendix Q approved
  • Packaged ventilation unit complete with built-in demand-control and a control panel
  • The latest EC fan motor technology with extremely low energy consumption (SFP as low as 0,26 Wh/m3 is used
  • 10 years lifetime for fans
  • 50 mm G4 compact filters are used on both supply and extracted air
  • F7 pollen filters are available as accessory
  • Installer and user-friendly solutions with adjustments of air volumes directly on the unit
  • Remote control as extra accessory
  • Highly-efficient light-weight Dantherm alu counterflow heat exchanger
  • Wall mounted and attic-mounted MVHR solutions
  • Vertical and horizontal models
  • Perfect match of high heat recovery ratio and low power consumption
  • Comply with EU legislations and are PHI, DiBt, SAP Appendix Q and  EN 308 certified
  • Air volumes from 330 to 820 m3/h
  • Wide range of accessories
  • Condensation drain
  • The wall models are made with 32 mm thick extruded polystyrene (EPS) wall and 0,8 mm Aluzink panels
  • The attic models are made with 40 mm thick extruded polystyrene (EPS) walls and 0,8 mm Aluzink panels. They can be located in rooms with temperatures as low as -20oC
  • Complies with European fire safety requirements as specified in EN 13501 class E
  • Leakage rate (internal and external) <3% as specified in EN308
Home ventilationhcv 3hcv 4hcv 5hch 5hch 8
Max. air flow at 100 Pa ext. pressure (m3/h) 230  275  375  375  530
Heat exchanger type Dantherm Alu counterflow heat exchanger   
Temperature efficiency Up to 95 Note Condensing operation %    
By-pass No No Yes Yes Yes
Filter class supply/exhaust, standard G4/G4     
Surrounding temperature where the unit is installed +10 to +50 -20 to +50
Operational temperature range without pre-heating (oC) - 13 Note We recommend pre-heating at temperatures under -6 deg. C to ensure a balanced operation to +50     
Operational temperature range with pre-handling (oC) -30 to +50     
Power supply 1x230 V, 50 Hz     
Max. ampere consumption, without pre- and after-heat (A) 0,4  0,4  0,7   0,7  1,1
Max. power consumption, without pre- and after-heat (W) 88 88  154 154 246 
HxWxD (mm) 1005x530x434  1055x590x584  600x1180x580   600x1180x780

Duct connection Ømm

125  125  160 160  250 
Weight  33 32   45 52  70 
Outer cabinet material Aluzink     
Cabinet insulation, polystyrene (mm)  32    40 
Protection class IP20     
  • HCH filter for domestic ventilation HCH filter
  • HCH filter change HCH filter change
  • Dantherm HCH open HCH inside
  • Dantherm Home Ventilation HCV HCV Ducts
  • Dantherm HCV open HCV inside
  • Remote Control Remote Control
  • Wall mounting rail
  • Siphon trap kit
  • Heat cable, 3 m
  • Communication cable
  • Wireless remote control
  • Accessory control
  • Power supply 230VAC - 24VDC for duct control
  • Hygrostat
  • CO2 sensor
  • Heating coil for electricity
  • Water heating coil
  • Filters
Service manual